Double post inground lift L4800(E) equipped with bridge-type support arm

Short Description:

It is equipped with a bridge-type supporting arm, and both ends are equipped with a passing bridge to lift the skirt of the vehicle, which is suitable for a variety of wheelbase models. The skirt of the vehicle is in full contact with the lift pallet, making the lifting more stable.


Product Detail

Product Tags

Product Introduction

Product Description

The maximum lifting weight is 3500kg, which is suitable for lifting during vehicle overhaul.
The main unit is buried underground, the design is compact, and the foundation construction work surface is small, saving basic investment.
It is equipped with a bridge-type supporting arm, and both ends are equipped with a passing bridge to lift the skirt of the vehicle, which is suitable for a variety of wheelbase models. The skirt of the vehicle is in full contact with the lift pallet, making the lifting more stable.
The pallet is made of steel pipe and steel plate after bending, the structure is considered, and the lifting is more stable.
According to user needs, after the equipment returns, the support arm can be designed in two parking methods: 1. Falling on the ground; 2. Sinking into the ground, the upper surface of the support arm is flush with the ground, and the ground is more beautiful.
The simple structure design ensures that the overall operating environment is open and smooth when the vehicle is lifted for maintenance.
Equipped with a rigid synchronization system to ensure the synchronization of the lifting of the two lifting post. After the equipment is debugged and determined, it is no longer necessary to repeat the leveling for normal use.
Equipped with mechanical lock and hydraulic safety device, safe and stable.
Equipped with the highest limit switch to prevent misoperation from causing the vehicle to rush to the top.
L4800(E) has obtained CE certification

Technical Parameters

Lifting capacity  3500kg
Load sharing  max. 6:4 ior against drive-odirection
Max. Lifting height 1850mm
Entire Lifting (Dropping)Time 40-60sec
Supply voltage AC380V/50Hz(Accept customization
Power 2 Kw
The pressure of the air source 0.6-0.8MPa
N.W. 1300 kg
Post diameter 140mm
Post thickness 14mm
Capacity of oil tank 12L

L4800 (1)

L4800 (1)

L4800 (1)

L4800 (1)


  • Previous:
  • Next:

  • Write your message here and send it to us