Single post inground lift L2800(A-1) equipped with X-type telescopic support arm
LUXMAIN single post inground lift is driven by electro-hydraulic. The main unit is completely hidden under the ground, and the supporting arm and power unit are on the ground. This fully saves space, makes work more convenient and efficient, and the workshop environment is clean and safe. It is suitable for car repair and cleaning lifting.
The whole set of equipment is composed of three parts: main unit, supporting arm and electric control cabinet.
It adopts electro-hydraulic drive.
The main unit is underground, the arm and the electric control cabinet are on the ground, which takes up less space and is suitable for small repair and beauty shops and homes to quickly repair and maintain vehicles.
Equipped with X-type telescopic support arm to meet the needs of different wheelbase models and different lifting points. After the equipment returns, the support arm is parked on the ground. The support arm is equipped with lock teeth, when the support arm is on the ground, the lock teeth are in a clutched state. Before the vehicle is ready to enter the lifting station, adjust the support arm to keep parallel with the direction of travel of the vehicle. After the vehicle enters the lifting station, it stops, adjust the supporting arm so that the palm is aligned with the lifting point of the vehicle. When the equipment is lifting the vehicle, the locking teeth will engage and lock the supporting arm, which is safe and stable.
Equipped with electric control cabinet，the control system adopts 24V safety voltage to ensure personal safety.
Equipped with mechanical and hydraulic safety devices，safe and stable.When the equipment rises to the set height, the mechanical lock is automatically locked, and personnel can safely perform maintenance operations. The hydraulic throttling device, within the maximum lifting weight set by the equipment, not only guarantees a faster ascent speed, but also ensures that the lift slowly descends in the event of mechanical lock failure, oil pipe bursting and other extreme conditions to avoid sudden rapid speed fall causing a safety accident.
|Load sharing||max. 6:4 in or against drive-on direction|
|Max. Lifting height||1850mm|
|Supply voltage||AC220/380V/50 Hz（Accept customization）|
|The pressure of the air source||0.6-0.8MPa|
|Capacity of oil tank||8L|