Single post inground lift L2800(F-1) with hydraulic safety device

Short Description:

It is equipped with a bridge-type supporting arm, The supporting arm is inlaid with the grille, which has good permeability and can thoroughly clean the vehicle chassis.

During non-working hours, the lifting post returns to the ground, the support arm is flush with the ground, and does not take up space. It can be used for other work or store other items. It is suitable for small repairs and beauty shops.


Product Detail

Product Tags

Product Introduction

LUXMAIN single post inground lift is driven by electro-hydraulic. The main unit is completely hidden under the ground, and the supporting arm and power unit are on the ground. This fully saves space, makes work more convenient and efficient, and the workshop environment is clean and safe. It is suitable for car repair and cleaning lifting.

Product Description

The whole set of equipment is composed of three parts: main unit, supporting arm and wall-mounted power unit.
It adopts electro-hydraulic drive.
The main unit out cover is a Ø273mm round steel pipe, which is buried underground.
During non-working hours, the lifting post returns to the ground, the support arm is flush with the ground, and does not take up space. It can be used for other work or store other items. It is suitable for small repairs and beauty shops.
It is equipped with a bridge-type supporting arm, which lifts the skirt of the vehicle.The width of supporting arm is 520mm, making it easy to get the car on the equipment. The supporting arm is inlaid with the grille, which has good permeability and can thoroughly clean the vehicle chassis.
The wall-mounted power unit is equipped with an ascending button and a descending handle for easy and efficient operation.
Equipped with hydraulic safety devices,within the maximum lifting weight set by the equipment, not only guarantees a faster ascent speed, but also ensures that the lift slowly descends in the event of mechanical lock failure, oil pipe bursting and other extreme conditions to avoid sudden rapid speed fall causing a safety accident.

Technical Parameters

Lifting capacity 3500kg
Load sharing  max. 6:4 in or against drive-on direction
Max. Lifting height 1850mm
Raising/Lowering Time 40/60sec
Supply voltage AC220/380V/50 Hz( Accept customization)
Power 2.2kw
The pressure of the air source 0.6-0.8MPa
Post diameter 195mm
Post thickness 15mm
N.W. 746kg
Capacity of oil tank 8L
f1

  • Previous:
  • Next:

  • Write your message here and send it to us